BeziFix® Anchor

Product Details

Fastens in concrete without dowels. For optimal fastening close to edges, no splitting effect.
Easy push-through installation. Saves a great deal of time because the BeziFix® Anchor ZF/ZS/ZSS is only pushed through the part to be anchored.
Drill hole diameter smaller than with expansion anchors. Also saves lots of installation time.
Sawtooth thread in the front. Makes it easy to screw into the pre-drilled concrete.
Just tighten by hand to achieve the full load-bearing capacity. Does not need a torque wrench.
Approved with grades C 20/25 to C 50/60 in cracked and non-cracked concrete. There are few restrictions on the application, gives security.
Includes installation instructions and Stabebo® SDS drill with four-edged geometry specially for reinforced concrete. Time-saving, practical, precise, all accessories enclosed.
Design values. SIHGA® performs the calculation for you.
BeziFix® Anchor ZF with counter-sunk head and Torx drive
Bezifix® Anchor ZS with hex head
BeziFix® Anchor ZSS with hex head and washer DIN 440. Ensures optimum force transfer when screwed in.

SIHGA® TIP

Ensure correct drill diameter and drill quality, the drill is therefore enclosed. Tangential impact wrench recommended for processing.